Four Patches, basic units that seem so simple to make. Just stitch 4 squares together, either individually or with strip piecing and you’re good to go. But anyone who has attempted these units knows that they are notoriously difficult to make perfectly. Either the...

We are confident you will quickly discover why Studio 180 Design’s First Choice© rulers are our go-to rulers for so many construction tasks. This all-in-one ruler can be used for projects from simple to complex in a variety of unique applications. Made of: Acrylic...

An in between tool that trims down Flying Geese units in 9 additional size not covered with the Wing Clipper 1. Many of today’s best designers like to create quilts and patterns with Flying Geese units that are based on finished heights of 1/4in...

We are confident you will quickly discover why Studio 180 Design’s First Choice© rulers are our go-to rulers for so many construction tasks. This all-in-one ruler can be used for projects from simple to complex in a variety of unique applications. Made of: Acrylic...

Finally a tool that simplifies the construction of the Diamond Square unit without having to use paper foundation piecing. The Square Squared (Square2) is an all-in-one tool that gives you a window template for accurately cutting the center square, a chart printed right on...

The Corner Pop II, like our original Corner Pop, allows you to add a “pop” of color to any 90 degree corner. The “pop” with this tool will be twice as tall as it is wide, providing a much “spikier” look, and even more...

The Corner Pop III, like our original Corner Pop, allows you to add a “pop” of color to any 90 degree corner. The “pop” with this tool will be three times as tall as it is wide, providing a much “spikier” look, and even...

That's right; you asked, we listened, and at long last we've added a half inch version of the Square Squared tool to our lineup! Now you can make your Diamond Square units in the half inch, in-between finished unit sizes that aren't available on...

The Eighth Inch Tucker Trimmer trims down 13 different unit sizes in 1/8in, 3/8in, 5/8in & 7/8in increments. For all the times when you just have to trim to an 1/8in increment. Use it to quickly and accurately trim down units that are made...

We know many of you have been looking for a larger Square Squared tool to make big Diamond Square units for your modern quilts or for framing your beautiful embroidery. But what would you say if we told you could also use it to...

A larger version of the Petite Hunter's Star tool, this ruler uses the same easy strip piecing steps and same accurate trim down processes, but it results in blocks more appropriate for those larger quilt projects. The tool includes step by step illustrated instructions,...

The Pint Size Tucker Trimmer combines the 12 smallest sizes from our original Tucker Trimmer I and Tucker Trimmer II into one easy to use tool giving you access to ¼”, ½”, ¾” and whole inch size units all on the same tool. Use...

The Pint Size Wedge Star tool is a small version of our Wedge Star tool. It includes 11 sizes: the 3" to 12" block sizes from the Wedge Star tool plus one additional smaller size, so now you can also create 2" wedge stars!...

An “in between” version of the original Tucker Trimmer I tool, this handy ruler allows you to do all of the same functions as the first except that the sizes of the units are in 1/4in or 3/4in increments. Although these particular sizes are...

The Rapid Fire Hunter’s Star tool and technique allow for streamlined construction and precision trim down and thus results in ease and accuracy when making these traditionally difficult blocks. There are multiple sizes on each tool, clearly illustrated step by step instructions, design layout...

The Wedge Star tool is sure to be an exciting addition to your quilting toolbox! Designed to make a variety of different blocks based on 45º sub-units, ranging from simple kaleidoscope blocks to complex stars with diamond points going north, south, east and west....

Finally, a tool and technique that will give you high success adding fabric corners to basic shapes. For years we’ve been layering small squares on big squares, marking & stitching on a diagonal line, then hoping everything lines up when we fold the small...

Now you can make those tough elongated diamond units needed for any Storm at Sea project with ease and success. But remember, this is a basic unit that can combine with any of the other fundamental units to create many, many other interesting designs...

Are you ready to dive into the world of 60 degree quilting designs? Our Star 60™ tool brings the same concept of oversizing and trimming down into the realm of 60 degree shapes. We begin with a basic Star 60 unit, containing a diamond...

The Pint Size Wing Clipper combines the four smallest sizes from our original Wing Clipper I and Wing Clipper II tools, allowing you to create 8 of the most commonly used Flying Geese sizes. This tool and the associated Fast Flying Geese construction technique,...

This tool creates a fundamental unit that is sure to add sparkle to your quilt block designs. Although the ruler shape is similar to the V Block, the final unit has two seamlines radiating from a single corner, so the center triangle in the...

Finally a tool for dealing with pieced rectangles that is easy to use and accurate. The Split Rects ruler gives you all you need to make perfect units every time: charts for the starting strips, guide lines for cutting the elongated triangles, an angled...

Finally, a tool and technique that will allow any quilter to quickly, easily and accurately piece traditional Lemoyne Star blocks in 10 different sizes! The block units are strip pieced, assembled without using any “Y” seams, pieced so that the blocks themselves are slightly...

This tool is a must have if you like making quilts with these tall star point units. Sometimes known as “Peaky and Spike”, a nickname attached to the unit about 20 years ago by a famous quilter, Doreen Speckman, this particular shape has perplexed...

The Quilter’s Magic Wand is an accurate 1/2in wide ruler with an etched line running down the middle. Use it for marking or measuring when high precision is required. It is especially useful for marking those diagonal seam lines when using the Tucker Trimmer...

The third in the Tucker Trimmer series of rulers, this version of our Tucker Trimmer is used for any block or unit that is larger than a 6in finished block size. It has all of the sizes of the Tucker Trimmer 1 plus thirteen...

The Wing Clipper is a must have tool if you are making Flying Geese units for your quilt. This tool, and the associated Fast Flying Geese construction technique, allow you to make four finished units from five squares. The best part is that each...

The Tucker Trimmer tool was designed to help quilter’s quickly and easily trim down units that are made with triangles: half square triangle squares, quarter square triangle squares (hourglass units), and combinations of half square and quarter square triangle squares (combination units). It has...